Author: Li Jhon

To Bondo rocker panels, first, clean the surface and remove all rust and dirt. Then, apply Bondo body filler and smooth the surface using sandpaper and a putty knife. Inspection…

To adjust Teraflex ball joints, start by removing the castle nut and cotter pin and then use a ball joint press tool to press out the old joint and press…

To build your own lift kit, you will need to select the appropriate components and carefully follow installation instructions. We will provide a step-by-step guide on how to choose and…

To adjust the camber on a Chevy truck, you will need to use a camber adjustment kit or have the alignment adjusted by a professional technician. This ensures proper wheel…

To build a rock crawler Jeep, start by installing off-road tires for increased traction and a lift kit to improve ground clearance. Then, add heavy-duty suspension components and a winch…

To adjust the windshield wiper position, lift the wiper arm away from the windshield and release the locking mechanism, then slide the arm up or down to the desired position…

To calibrate a throttle position sensor, you need to follow a specific procedure to ensure accurate readings. We will discuss the steps involved in calibrating a throttle position sensor and…

To adjust caster on a Chevy truck, you need to locate the upper or lower control arm eccentric. This eccentric allows you to change the angle of the control arm,…

To adjust valves on a hydraulic roller cam, follow these steps: loosen the rocker arm nut, spin the pushrod until it bottoms out, tighten the rocker arm nut until you…