Blog

To build a Honda Ruckus, you need to gather the necessary parts and follow the step-by-step instructions. The Honda Ruckus is a popular scooter among enthusiasts, known for its rugged…

To adjust KYB shocks, start by removing the old shocks and installing the new ones according to the manufacturer's instructions. Then, use a shock adjustment tool to fine-tune the dampening…

To adjust the idle air control valve on a Honda, locate the valve, remove the screws, adjust the valve using a voltage meter, and tighten the screws. Proper adjustment will…

To adjust Uhaul mirrors, follow these steps: 1. Sit in the driver's seat and locate the mirror adjustment control switch. 2. Use the switch to position the mirrors for optimal…

To adjust the idle on a Chevy 350, locate the idle speed screw on the carburetor and turn it clockwise to increase idle speed or counterclockwise to decrease it. It's…

To adjust the drag link, first, locate the adjusting sleeve on the link and loosen the lock nuts. Then, rotate the sleeve to lengthen or shorten the drag link as…

To adjust Fox 2.0 Performance Shocks, follow these steps: first, locate the adjustment knob; then, turn it clockwise to increase damping and counterclockwise to decrease damping. Fox 2.0 Performance Shocks…

To Bondo rocker panels, first, clean the surface and remove all rust and dirt. Then, apply Bondo body filler and smooth the surface using sandpaper and a putty knife. Inspection…

To adjust Teraflex ball joints, start by removing the castle nut and cotter pin and then use a ball joint press tool to press out the old joint and press…